Augers & Trenchers
Augers
Augers & Drive Units:
Our enormous range of Auger Torque and Earth Drills and Augers cover 360° excavators from 0.75 tonne 'micros' up to 35 tonne machines and skid steer loaders, and all but the very smallest feature integral, high torque, planetary reduction gearboxes.
This torque, allied to the constant spiral design of the augers, gives outstanding digging power, even in hard ground conditions. With optional tungsten tipped teeth even fracturable rock and sandstone can be penetrated.
Our enormous range of Auger Torque and Earth Drills and Augers cover 360° excavators from 0.75 tonne 'micros' up to 35 tonne machines and skid steer loaders, and all but the very smallest feature integral, high torque, planetary reduction gearboxes.
This torque, allied to the constant spiral design of the augers, gives outstanding digging power, even in hard ground conditions. With optional tungsten tipped teeth even fracturable rock and sandstone can be penetrated.
Drive Units:
With planetary drive gearboxes to match flow and pressure of the excavator and provide optimum torque. These can be fitted with various brackets, to allow interchange between different machines, provided they are within the correct weight range for the unit. Most modern machines will be equipped with the two-way, auxiliary hydraulic circuits, necessary to drive an auger or trencher.
Auger Flights: Depending on your machine - and our sales team will be happy to advise on this - you can have augers from 100 mm on smaller machines to 1200 mm diameter on 35 tonners, and can bore as deep as 10 metres using extensions on the largest. Two main types of auger build are available; standard 'earth' teeth & pilots and the harder-wearing "tungsten" teeth & pilots. Depending on the size of drive, you can chose from a range of auger flight diameters from 100mm upwards. Diameters: 100 to 1,200 mm Depths: up to 10 metres |
Trenchers
Chain Trencher Attachments:
Suitable for mini excavators from 3t minimum (i.e will not work on 2.5 or 2.8 tonne machines) to 10t and also skid steer loaders.
These trenching attachments are powered by the auxiliary hydraulic circuit. More powerful than pedestrian operated 'dedicated' trenchers and cheaper than most self-propelled trenchers, these powerful attachments have the added benefit of being able to use the arm reach and slew function of the excavator. Narrow trenches can be cut quickly and effortlessly into most soil conditions, even in wet ground.
Suitable for mini excavators from 3t minimum (i.e will not work on 2.5 or 2.8 tonne machines) to 10t and also skid steer loaders.
These trenching attachments are powered by the auxiliary hydraulic circuit. More powerful than pedestrian operated 'dedicated' trenchers and cheaper than most self-propelled trenchers, these powerful attachments have the added benefit of being able to use the arm reach and slew function of the excavator. Narrow trenches can be cut quickly and effortlessly into most soil conditions, even in wet ground.
Models:
T600
Attachment weight: 180kgs Flow required: 35 l/min minimum Cut width: 100 to 200mm Depth: 300 to 600mm T900 Attachment weight: 240kgs Flow required: 45 l/min minimum Cut width: 100 to 300mm Depth: 600 to 900mm |
T1200
Attachment weight: 350kgs Flow required: 70 l/min minimum Cut width: 150 to 300mm Depth: 800 to 1200mm T1500 Attachment weight: 450kgs Flow required: 80 l/min minimum Cut width: 150 to 200mm Depth: 1000 to 1500mm |
Features:
Cut widths: 80 to 300 mm
Cut depths: 450 to 1200 mm
Contact us for information.
Please note: Unfortunately, mini excavators below 2.7 tonnes do not have sufficient power (flow x pressure) to use these attachments.
- Side discharge augers, to move spoil away from trench.
- Crumbers are standard on the T1200 and T900 and optional extra on the T600.
Cut widths: 80 to 300 mm
Cut depths: 450 to 1200 mm
Contact us for information.
Please note: Unfortunately, mini excavators below 2.7 tonnes do not have sufficient power (flow x pressure) to use these attachments.